How to Stack Hides When Salting. — (Copyrighted; Reprint Forbidden.)
One of the most important features in salting hides is the way they are stacked when salted. The hides must be so piled that they are perfectly level and the salt must be distributed over every part of the hide. The flesh side should be up, and the salt should be rubbed over them evenly. The hides can be piled about two feet high. The legs of the hide should be kept straight and flat, so the salt gets into all crevices. The edges of the stack of hides should be kept a trifle higher all around than the center of the stack, so the natural moisture that comes out of the hide and the dry salt will remain on them. If the hides are salted on a slanting floor, or if the hides are piled up carelessly so the hides lie slanting, the brine composed of moisture of the green hide and the salt will run off and then the percentage of loss from shrinkage will be large.