A Box-Sled for Baby
Procure a deep, smooth soap-box, and decide how high you wish the back and front to be; then take a piece of brown paper, the exact size of the sides of the box, and mark on it a curve, which shall unite the high back with the low front. After this has assumed a perfectly satisfactory form, cut it out and tack it on one side of the box. Mark the outline carefully on both side-pieces, and saw the boards as indicated by the line; cut the front straight across, and rasp and sand-paper the edges till they are very smooth and well rounded. Next paint the box inside and out, excepting the bottom, which is to be fastened to the sled, with a thick coat of burnt umber, and give it a good drying. Then with light-blue paint, make a narrow band, one-fourth of an inch wide, entirely around each side, the back, and the front, about half an inch from the edge. Stencil a pretty design on the back, and the name of the little owner on each side; let this thoroughly dry, and finish with two coats of varnish. A little seat can be fitted in the back part if desired, but a pillow answers the purpose much better.
—————◀▶—————